Last part (3) of the Elmo GS 1200 Xenon restoration project

A forum to share ideas and opinions on the equipment and technical aspects of film, video and AV making.
Post Reply
Desmond Godwin
Posts: 34
Joined: Wed Feb 08, 2012 8:30 pm

Last part (3) of the Elmo GS 1200 Xenon restoration project

Post by Desmond Godwin »

For anyone out there that was following my restoration of the Elmo GS1200 Xenon its now completed and you can watch the final part(3) below.



Thanks. :) Desmond
Top
tom hardwick
Posts: 914
Joined: Mon Jan 29, 2007 9:59 am

Re: Last part (3) of the Elmo GS 1200 Xenon restoration proj

Post by tom hardwick »

Fascinating. But I was rather surprised that the hubs of the feed and take-up spools didn't scratch that soft emulsion in the extended scratch test.
Top
Desmond Godwin
Posts: 34
Joined: Wed Feb 08, 2012 8:30 pm

Re: Last part (3) of the Elmo GS 1200 Xenon restoration proj

Post by Desmond Godwin »

Tom thanks for comment. In relation to the take-up spools you may notice that the two of them are clear plastic types. They have 2 hubs with the outer one being compleatly smooth and that is why i used these for the testing. There is also a lot of slack on the loop but no scratches showed on the monitor after that extended time.
:) Desmond

http://img405.imageshack.us/img405/9719/reel1.jpg
Top
Post Reply

Return to “Equipment and Technical Issues”