For anyone out there that was following my restoration of the Elmo GS1200 Xenon its now completed and you can watch the final part(3) below.
Thanks. Desmond
Last part (3) of the Elmo GS 1200 Xenon restoration project
-
- Posts: 34
- Joined: Wed Feb 08, 2012 8:30 pm
-
- Posts: 914
- Joined: Mon Jan 29, 2007 9:59 am
Re: Last part (3) of the Elmo GS 1200 Xenon restoration proj
Fascinating. But I was rather surprised that the hubs of the feed and take-up spools didn't scratch that soft emulsion in the extended scratch test.
-
- Posts: 34
- Joined: Wed Feb 08, 2012 8:30 pm
Re: Last part (3) of the Elmo GS 1200 Xenon restoration proj
Tom thanks for comment. In relation to the take-up spools you may notice that the two of them are clear plastic types. They have 2 hubs with the outer one being compleatly smooth and that is why i used these for the testing. There is also a lot of slack on the loop but no scratches showed on the monitor after that extended time.
Desmond
http://img405.imageshack.us/img405/9719/reel1.jpg
Desmond
http://img405.imageshack.us/img405/9719/reel1.jpg